Discontinued Automation Lines: What's Obsolete, What Replaced It, and What Your Old Stock Is Worth

Some of the most common PLCs, drives and HMIs in North American plants are no longer made. If you are a manufacturer or distributor sitting on boxes of them, that stock didn't stop being useful when the factory stopped building it. For plenty of buyers it became harder to find, and that is when surplus is worth the most.

Discontinued lines at a glance

Dates come from the manufacturer or the source linked in each row. Lifecycle notices get revised, so check the manufacturer's own notice before you plan a migration around a date.

Product line Status Successor Source
Allen-Bradley PLC-5 Discontinued July 31, 2017 ControlLogix Rockwell Automation
Allen-Bradley SLC 500 processors Discontinuation of the processors announced for 2024 CompactLogix ProSoft Technology
Allen-Bradley MicroLogix 1000 and 1500 Production ended June 30, 2017 Micro800 (typical path) The Automation Blog
Allen-Bradley PanelView Plus 6 Discontinuation scheduled for September 2021 PanelView Plus 7 Rexel USA
Allen-Bradley PowerFlex 70 Listed as End of Life; discontinued date May 30, 2027 PowerFlex 750-series (typical path) Rockwell Automation
Siemens SIMATIC S5 End of life SIMATIC S7 Foxmere
Siemens S7-300 and ET 200M No longer sold new from October 1, 2025; spare parts only S7-1500, ET 200MP, ET 200SP Eichler (citing Siemens)
Siemens MICROMASTER drives Discontinued; spare parts for a limited time SINAMICS (G120) Siemens
GE Fanuc Series 90-30 Obsolete; factory no longer builds parts Emerson PACSystems RX3i Instrumart
Modicon Quantum (e.g. 140CPU65160) Discontinued December 31, 2018; end of service December 31, 2027 Modicon M580 (e.g. BMEP582040) Schneider Electric
Mitsubishi MELSEC A / QnA (large type) Production ended September 2006; service ended September 2013 MELSEC Q / iQ-R Mitsubishi Electric
Mitsubishi MELSEC AnS / QnAS CPUs Production ended September 2014; service ended September 2021 MELSEC Q / iQ-R Mitsubishi Electric

Why discontinued stock still sells

A plant doesn't rip out a working control system because the manufacturer moved on. Migrating a line from PLC-5 to ControlLogix or from S7-300 to S7-1500 means new hardware, rewritten code, downtime and validation. Many plants put that off for years and keep the old system running with spare parts in the meantime.

That creates steady demand for exactly what sits on a lot of distributor shelves and in manufacturers' spare-parts cages:

  • Processors and CPUs. The part that stops a line cold when it fails.
  • I/O modules and chassis. Plants buy these in quantity to keep spares on hand.
  • Power supplies and communication cards. Small parts, but nothing runs without them.
  • Drives and HMIs. Swapping like-for-like avoids reprogramming and re-wiring.

Once a line is out of production, new-in-box and factory-sealed units become scarce. Condition matters more than ever, and so does an accurate part number and firmware revision.

If you run legacy equipment: a simple spares plan

  1. List what you run. Record the catalog number, series and firmware for every processor, I/O card, drive and HMI on the floor.
  2. Rank by risk. A single processor that stops a whole line ranks above a spare I/O slot.
  3. Stock the critical spares. One tested spare for each critical part number is usually enough.
  4. Back up programs and settings. Store PLC programs, drive parameters and HMI files off the machine.
  5. Plan the migration on your schedule. Spares buy time, so you migrate when it suits you, not when something fails.

You can browse in-stock legacy parts here: Allen-Bradley, Siemens, Schneider Electric / Modicon, GE, Mitsubishi, PLCs, VFDs and HMIs.

If you hold the stock: don't scrap it, sell it

When a line is discontinued, a lot of manufacturers and distributors write the stock down and leave it on the shelf, or scrap it during a warehouse cleanup. That's usually the wrong move. Discontinued automation parts in good condition are often worth more than slow-moving current parts, because there is no new supply behind them.

What gets the best offer:

  • New in box or factory sealed, with original labels intact
  • Clear catalog numbers and series or revision letters
  • Complete lots rather than a few picked-over pieces
  • Stored dry and indoors, with no water or crush damage

To score your stock in two minutes, use our excess inventory value checklist. For a full walkthrough of clearing a large lot, see our Excess and Obsolete Inventory Guide for Manufacturers.

Have discontinued automation stock?

VB Industrial Supply buys discontinued and excess PLCs, drives, HMIs and I/O from manufacturers and distributors. Send your list and get one offer for the whole lot, usually within one business day. We cover freight and pay on arrival.

Get a quote for your inventorySell PLCs

By brand: Allen-Bradley · Siemens · Schneider / Modicon · GE · Mitsubishi · VFDs · HMIs

Published by VB Industrial Supply, Ventura, California. Brand and product names belong to their owners; VB Industrial Supply is not affiliated with or authorized by any manufacturer listed. Lifecycle dates are taken from the sources linked above and can change.